Chimney Repair & Rebuilding Services

Why Chimney Maintenance Matters

Your chimney does more than just vent smoke. It protects your home from water intrusion, keeps dangerous gases out of your living spaces, and supports the structural integrity of your roof. When you ignore cracks, leaning, or crumbling mortar, you are putting your family at risk and opening the door to expensive repairs down the line.

Here in Little Rock, AR, our weather puts extra stress on masonry structures. Summer heat expands bricks, winter freezes cause water trapped in cracks to expand, and heavy rains wash away compromised mortar. A chimney that looks fine from the ground might have hidden damage that is getting worse with every storm. We have seen chimneys that needed just a few hundred dollars in tuckpointing turn into full rebuilds because the problem went unnoticed for too long.

When you call us, we climb up and inspect every inch of your chimney. We check the crown, the flashing, the mortar joints, the flue liner, and the overall structure. If something is wrong, we will show you exactly what needs fixing and why. No pressure, no sales talk. Just honest advice from local masonry experts who have been doing this work for years.

Common Chimney Problems We Fix

Most chimney issues fall into a few categories. Once you know what to look for, you can catch problems early and save yourself a lot of money and stress.

Cracked or Missing Chimney Crown

The chimney crown is the concrete slab at the top of your chimney. It sheds water away from the flue and protects the bricks underneath. When the crown cracks or breaks apart, water seeps into the chimney structure and causes freeze-thaw damage. We rebuild crowns with proper slope and overhangs so water runs off instead of soaking into your masonry.

Damaged Flashing

Flashing is the metal seal between your chimney and your roof. It keeps water from running down into your attic. When flashing fails, you get leaks, stains on your ceiling, and rot in your roof deck. We install new flashing using counter-flashing techniques that last for decades, not just a few seasons.

Spalling Bricks and Crumbling Mortar

Spalling happens when water gets inside bricks and freezes. The ice expands, the brick surface flakes off, and eventually the whole brick crumbles. If you see chunks of brick or mortar on the ground near your chimney, that is spalling. We remove damaged bricks, match the color and texture, and rebuild the affected sections with proper mortar mix. This keeps the damage from spreading and restores structural strength.

• ✓Leaning or tilting chimneys caused by foundation settlement or structural failure
• ✓Deteriorated flue liners that expose your home to carbon monoxide and fire hazards
• ✓Water stains inside your home near the fireplace or in the attic
• ✓Rusted dampers, cracked smoke chambers, or missing chimney caps

No matter what is wrong with your chimney, we have the tools and experience to fix it right. We have been working on chimneys across Little Rock for years, and we have seen just about every type of damage you can imagine. When we say we can fix it, we mean it.

When to Repair vs. When to Rebuild

Not every chimney problem requires a full rebuild. Sometimes a repair is all you need. Other times, rebuilding is the smarter choice. Here is how we help you decide.

If the damage is isolated to the top few feet of the chimney, a repair usually makes sense. We will replace damaged bricks, rebuild the crown, install new flashing, and make sure everything is sealed up tight. This approach saves you money and gets your chimney back in working order fast.

If the chimney is leaning more than a few inches, if the flue liner is shattered, or if most of the bricks are spalling, a rebuild is often the better option. Trying to patch up a failing chimney is like putting a band-aid on a broken bone. It might hold for a little while, but it will not last. A proper rebuild gives you a chimney that will stand strong for decades.

We walk you through the pros and cons of each option. We show you photos of the damage, explain what is causing it, and give you an honest recommendation. If you want a second opinion, we encourage it. We are confident in our work, and we want you to feel confident in your decision.

Whether you need tuckpointing and repointing or a complete teardown and rebuild, we handle it all. We pull permits when required, follow local building codes, and make sure your new chimney meets all safety standards. You get peace of mind knowing the job was done right.

Frequently Asked Questions